Description
Carburator -DELLORTO / SPACO SI26/26E
(Ø=25mm)- Vespa PX200 (type with autolube) - 0617
Description
carburettor DELLORTO / SPACO SI26/26E (Ø=25mm) Vespa PX200 (type with separate lubrication)
- main nozzle: 120
- second nozzle: 55/160
- mixing tube: BE3
- Main air correction nozzle: 160
- Slide 04 - BE3 - Main jet 120 - Idle jet 55/160 - Air corrector 160 - Choke jet 60
The carburettors of the same series always differ only in their vehicle-specific equipment. However, this can easily be adapted to any new application. For example, a 20/20D can also be modified for operation with a larger cylinder.
separate lubrication
Carburettors for vehicles with separate lubrication can also be used on vehicles without separate lubrication.
| Carburettors | |
|---|---|
| size venturi: | 26 mm |
| size main jet: | 120 |
| main jet type: | Dellorto SI (4576) |
| size pilot jet: | 55/160 |
| idle jet type: | Dellorto SI (9892) |
| size air jet: | 160 |
| air jet type: | Dellorto SI (5827) |
| size choke jet: | 60 |
| choke jet type: | Dellorto SI (5582) |
| size atomiser: | BE3 |
| power jet: | |
| size slide: | 8492.4 |
| slide type: | flat slide |
| choke type: | manual, cable |
| mounting type air filter: | with screws |
| connection size air filter: | 33 mm |
| mounting type intake manifold: | flange connection |
| connection size intake manifold: | 60 mm |
| idle gas screw: | on top |
| fuel/air mixture screw position: | left hand side |
| fuel hose position: | right hand side |
| connection size fuel hose: | 8 mm |
| height: | 125 mm |
| width: | 71 mm |
| depth: | 80 mm |
| material float chamber: | metal |
| connector for oil hose: | |
| vacuum connection: | |
| OEM numbers (for comparison purposes only) | |
| DellOrto | 00617 |
