Description

Spanish Vespa Motovespa Steering & Glovebox lock 125CL 125 Super 150s GT160 and many more

I have also fitted this steering lock on a SS180

A: Overall Length: 31 mm
B: upper collar width: 4 mm
C: rear width: 6 mm
D: upper length: 13 mm

Lock set consisting of toolbox lock and steering lock
-OEM QUALITY-
Motovespa 150S (Motor 502M),
150 Sprint (Motor 04M),
150 GS (Motor 04M),
160 (Motor 09M),
SUPER (Motor 762M)
- 2 pieces with 4 keys

Steering locks or lock cylinders are inexpensive standard spare parts for your Vespa. No matter if you lost the key or the lock is rusty – our high quality cylinders are a decent replacement.

These cylinders locks can be used on the steering lock. They are available with a metal or plastic key cap. Due to the different lengths that are required we have divided our cylinders locks into three different sizes.

A: designates the complete length,

B: the collar at the top

C: the rear collar.

D: the upper length, this is the distance between the end of the lock and the little peg that secures the lock into the housing

A cylinder that is too long would stick out, a rear collar that is too small would not reach the steering column or the key bolt, with a front collar that is too wide, the cylinder will not fit in the steering column.
We specify standard use, but recommend a comparison with the key cylinder. This is how to err on the side of caution! We also describe in detail how to take the measurement and how the cylinder can be removed if the key is lost. The scope of supply includes a key cylinder and a pair of keys.
please measure your lock before purchase
may fit spanish pk range
(see below)

Motovespa 125 Primavera PN
Motovespa 125 Primavera NK
Motovespa 125 Primavera NV
Motovespa 125 Primavera T
Motovespa 125L
Motovespa 125N
Motovespa 125S
Motovespa 125 Super
Motovespa XL125 Plurimatic
Motovespa 150L
Motovespa 150F
Motovespa 150S
Motovespa 160CC (GT160)
MotoVespa P150X
Vespa SS180

please see my range of lock covers