Description
Wiring loom
-Grabor-
Vespa PX EFL Elestart with battery,
5 Wire Stator Plate
Description
A wiring harness is a wearing part. After many years in heat, cold, petrol fumes, vibrations and humidity, even the best copper cable becomes dilapidated. While the outside is usually still well camouflaged by an apparently intact insulation, the so-called inner strand is already corroded and brittle. A weak light, misfiring, all this is past with one of our new high quality wire harnesses.
So that the vehicle can be restored true to the original, we are supplied by the manufacturer who also then already produced the original wire harnesses for Piaggio. You can see, feel and notice that!
Many small affectionate details like the original cable lugs, shrinking tube, hand tinned cable ends etc. let the anticipation for the first ride rise strongly. The certainty that you can rely 100% on the electrical system again is also a safe resting place on the first long drive.
NOTE: Piaggio obtains its goods from various manufacturers in Europe and Asia. The picture material may therefore differ from the delivered goods.
| Wiring looms | |
|---|---|
| cable colours tail light: | black, blue, yellow/black |
| number of cables for tail light: | 3 |
| cable colours brake light switch: | 2x blue, grey |
| number of cables for brake light switch: | 3 |
| cable colours junction box (engine): | black (multiple plug), blue (multiple plug), green |
| number of cables for junction box (engine): | 3 |
| cable colours horn: | yellow |
| number of cables for horn: | 1 |
| cable colours rectifier: | 2x black, blue, green, grey, red, red/white |
| number of cables for rectifier: | 7 |
| cable colours battery: | red |
| number of cables for battery: | 1 |
| cable colours indicator rear rhs: | blue/white |
| number of cables for indicator rear rhs: | 1 |
| cable colours indicator rear lhs: | purple |
| number of cables for indicator rear lhs: | 1 |
| cable colours indicator front rhs: | black, blue |
| number of cables for indicator front rhs: | 2 |
| cable colours indicator front lhs: | black, brown |
| number of cables for indicator front lhs: | 2 |
| cable colours indicator relay: | green, grey, red/black, white |
| number of cables for indicator relay: | 4 |
| cable colours fuel gauge: | black, black/white, green/white |
| number of cables for fuel gauge: | 3 |
| cable colours starter relay: | green/black, pink |
| number of cables for starter relay: | 2 |
| number of cables for junction box (front): | 37 |
| cable colours buzzer: | grey, red/black |
| number of cables for buzzer: | 2 |
| OEM numbers (for comparison purposes only) | |
| Piaggio | 580347 |
Fits the following vehicles
Vespa (Piaggio) PX 150 E FL (VLX1T, 1984-1997)
Vespa (Piaggio) PX 125 E FL (VNX2T, 1984-1997)
Vespa (Piaggio) PX 200 E FL (VSX1T, 1984-1997)
Vespa (Piaggio) PX 125 E FL (ZAPM09300, 1998-2000)
Vespa (Piaggio) PX 125 E FL (ZAPM09302, 2001-)
Vespa (Piaggio) PX 150 E FL (ZAPM09400, 1998-2000)
Vespa (Piaggio) PX 150 E FL (ZAPM09401, 2001-)
Vespa (Piaggio) PX 200 E FL (ZAPM18, 1998-)
