Clutch friction plate set 

-BGM PRO TOURING Steel-

 Superstrong Racing Red- Vespa Cosa2 - suitable for standard clutch basket of Vespa Cosa2/FL (1992-), PX (1995-), Superstrong, Scooter & Service, MMW, Ultrastrong - 4 plates

Description

The BGM PRO Superstrong clutch facings in the "Racing Red" version belong to the most performant facings on the market. Manufactured exactly according to our specifications, we have managed to use a high-quality organic clutch facing mixture which is pressure and temperature stable at the same time. All this combined with a very good grip to always have the full torque on the rear wheel. So even with a very high spring force the separation distance is short, because the material is not as soft and compressible as that of other manufacturers.

The pad carrier consists of steel like the original Cosa2 pads. This means that, unlike the clutch facings with aluminium carrier material, they also fit into conventional Cosa2 clutch baskets (no CNC) with retrofitted reinforcement ring (clutch facings with aluminium carrier have longer lugs for the greater wall thickness of the CNC clutch baskets, e.g. BGM Superstrong). The pads can easily be used in standard as well as in CNC clutch baskets.

support material: steel (as original)

lining material: Semi-Organic

pressure resistant

heat resistant

more grip

shorter separation distance

usable in series and racing engines

Low wear

Fits all Cosa2 clutch baskets (not baskets for CR80 friction plates with wide flaps)

TOP TIPP: It is best to replace the steel discs at the same time. These are often discoloured and distorted and thus prevent the clutch from functioning properly.

To complete the clutch pack, 4 steel plates are required.

1x steel disc with notch 1,5mm

2x steel disc without notch 1,5mm

1x steel disc (base disc) 2,0mm

The bgm PRO Superstrong Racing Red plates are also available directly in a complete set with BGM PRO steel discs.

OEM numbers (for comparison purposes only)

BGM PRO BGM8084R