Engine gasket set inc O rings
VESPA- T5 125cc
Gaskets:
number of gaskets: 10
o-rings incl.: yes
number of o-rings: 6
oil seals incl.: no
head gasket incl.: no
base gasket incl.: yes
Description
The kit contains all of the O Rings you need to overhaul all of the main engine block, both sides.
It contains all that you see in the picture.
Includes the fibre oil drain plug washer
and all rubber O rings for the kickstart shaft, rear brake cam & backplate
(for clutch cover 'O' ring kits please see our other listings)
All engine gaskets should always be replaced during an overhaul.
The easiest way to do this is to lubricate the gaskets with a little grease to make them stick to the housing and prevent them from being bent or damaged during installation.
Sealing compound is only necessary if the housing is defective (scores in the sealing surface or similar).
If a healthy motor housing drips nevertheless, it is usually strained or crooked.
A strained housing is caused by unevenly tightened housing screws. Ideally the housing halves should be tightened evenly (crosswise!) with a torque wrench.
The maximum value here is 6-8NM according to Piaggio - specification.
Fits the following vehicles
Vespa (Piaggio) PX 125 T5 (VNX5T)
